Where To BuyThe substrate should be clean and dry and free of any substances which may impair adhesion. Application should take place within the re-coat intervals of the coating to which is to be applied. Re-coating interval @20°C (4- 6 hours) should be followed
AquaShieldPro UV Flex
Share
One Component, water based modified polyurethane, elastomeric, UV resistant, liquid applied membrane
In stock
Only %1 left
SKU
ASPPU
| DATA | RESULT |
| Colour | White, Black or Grey, Clear medium viscosity liquid |
| Mix Density (g/cm³) @ 25º C (ASTM D 1475) | approx. 1.4- 1.45 |
| Solid Content(ASTM D2369-10) | 62% |
| Wet film thickness | 1300 microns |
| Shore A hardness(ASTM D2240) | 75 |
| Tack free time@ +25 °C, 50% RH | Touch dry: 3-6 hours |
| Waiting time toOvercoat |
8 – 24 hours @ +20 °C6 – 24 hours @ +30 °C*Times will vary due to coating thickness, ambient temperature substrate humidity. |
| Full cure | 7 days |
| Crack Bridging(EN 1542) | > 2 mm |
| Tensile Strength(ASTM D412) | ≥ 1.5 N/mm² |
| Elongation at break (ASTM D412) | 800% |
| Tear Strength(ASTM D624) | ≥ 28 N/mm² |
| Swelling in water | Nil |
| Application Temperature | From +5º C to +45º C |
| Service Temperature | From -10º C to +90º C |
| Flash Point | Not flammable |
| LEED compliance (v4.1 Heat Island reduction SRI) |
Pass |
| LEED EQc4.2 | Pass (VOC) |
| BAAQMD Reg 8 Rule 3 | Pass (VOC) |
| VOC content | < 20 g/ liter |
* All values given are subject to 5-10% tolerance
* Properties listed above are only based on controlled laboratory samples and tests: Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
®=Registered trademark of the North Group.
Description
AquaSieldPro UV Flex is a one-part, polyurethane based, UV stable, water based liquid and cold-applied topcoat, designed to provide a durable, colour stable highly reflective topcoat for AquaShieldPro UV Flex waterproofing systems.
It is especially suited for exposed roof applications where UV colour stability is desired. It is a roller, brush, squeegee or spray-applied and is suitable for use in tropical and hot climatic conditions.
Additional Information
| Coverage: | Packaging: | Colours: |
| 0.35 litre/ m²/ coatAbove coverage is theoretical and does not include any additional material required due to surface porosity, profile, variations in level and wastage, etc. | Supplied as a 20 Litres, a one-pack material in pre-weighed quantity ready for on-site use. | White, Black, Grey and ClearAvailable in other colors on request based on minimum order quantities. |
Typical Applications
- For exposed roof waterproofing solutions in both new construction and refurbishment projects
- For internal & external use
- UV-stable Topcoat for AquaShieldPro polyurethane waterproofing systems
- Highly reflective topcoat for excellent cool roof characteristics
- For exposed roof waterproofing applications in both new construction and refurbishment projects for serviced roofs, flat or sloping roofs, cool roofs
- Fully cured AquaSieldPro UV Flex forms a permanently flexible waterproof lining to most building surfaces including reinforced concrete, block works, brick works, cement render, plaster board & fiber- reinforced cement.
- Wide range of waterproofing applications such as Roofs, Basements and Foundations, Tunnels and bridges, Terraces and Balconies, Car Decks, Plaza Decks, Planter Boxes, Retaining Walls, Internal Wet Areas (kitchens, bathrooms), Fountains and Pools.
Benefits
- Single component product, easy to use.
- Highly elastic and crack-bridging – retains flexibility even at low temperatures.
- Water based with low VOC content.
- Seamless, Easy to repair
- High elastic and crack-bridging
- Environment friendly - Low VOC
- Water vapour permeable
- Excellent adhesion to a wide range of construction materials
- Excellent workability.
- Good sag resistance and easy to apply, even on vertical surfaces.
- Withstands pedestrian traffic
Technical Data Sheet
Download
Substrate Preparation
Product Preparation
Pour and drain the full contents of the hardener container into the base container and mix thoroughly with a slow speed electric stirrer fitted with an appropriate paddle (300-400 rpm), for a minimum of 3 minutes until homogeneous
Product Application
Pre-Application Mixing:
AquaShieldPro UV Flex is a single component material. Prior to application, the temperature of the material should be in the range of 15-25°C. Some settling of the pigments may occur on standing. AquaShieldPro UV Flex should, therefore, be well stirred before use with a mechanical drill and paddle at a very low speed (approx. 300 rpm) for 1-2 minutes to achieve a homogenous consistency prior to application.
Application:
AquaSieldPro UV Flex is applied in one or two coats, by roller, brush or airless spray. Prior to the application, ensure that the roof waterproofing systems must have been installed and cured sufficiently. In case, if second coat is recommended Allow the first coat to dry (normally 1-5 hours depending on the climatic conditions), then proceed with the application of the second coat. The second coat of AquaSieldPro UV Flex should be applied at 90° to the first, ensuring that a final continuous coating.
Spray equipment:
Examples of suitable airless spray equipment models are the Keiser KP330 & KP230 or the Graco Mark V
Others
Write Your Own Review