Toggle Nav
  • My Cart
  • VAT
Search
Advanced Search
  • Compare Products
Menu
Account
Settings
  • Sign In
  • Create an Account
Go back

AquaShieldPro RBE 6010

Share
Login to earn Coins for sharing!

A high build bitumen / rubber latex emulsion. Surface applied, flexible, damp and vapour-proof liquid membrane

In stock
Only %1 left
SKU
ASPRBE6010
Be the first to review this product

Quantity Calculator

m²
Product Pack Size Coverage Unit Total Requirement No of units Required
AquaShieldPro RBE 6010 (250 Microns)-(Ist Coat) 20 0.20 ltr/m2
AquaShieldPro RBE 6010 (250 Microns)-(2nd Coat) 20 0.20 ltr/m2
AquaShieldPro RBE 6010 (250 Microns)-(Ist Coat) 0.00
AquaShieldPro RBE 6010 (250 Microns)-(2nd Coat) 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
AquaShieldPro RBE 6010 (250 Microns)-(Ist Coat) 200 0.200 ltr/m2
AquaShieldPro RBE 6010 (250 Microns)-(2nd Coat) 200 0.200 ltr/m2
AquaShieldPro RBE 6010 (250 Microns)-(Ist Coat) 0.00
AquaShieldPro RBE 6010 (250 Microns)-(2nd Coat) 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

main product photo
Where To Buy
DATA RESULT
Colour Thick viscousDark brown (liquid).Black (dry)
Density (g/cm³) @ 25º C(ASTM D 1475) 1.05 ± 0.05
Solid Content(ASTM D2369-10) 60 % ± 2
Rubber Content 10% in dried film
Wet film thickness 400 microns
Tack free time 30-45 minutes
Drying Time @ 25º C 6–8 hours per coat
Overcoating Time 4 - 24 hours
Application Temperature From +5º C to +55º C
Service Temperature From -10º C to +85º C
pH Value 10-11
Flash Point Non-flammable
VOC content < 30 g/ liter

 

* All values given are subject to 5-10% tolerance

* Properties listed above are only based on controlled laboratory samples and tests: Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.

®=Registered trademark of the North Group

Description

Non-fibrated, rubberized, liquid applied bitumen emulsion coating with selected fillers or extenders, it offers brushing consistency which dries to give an elastomeric, flexible, jointless, tough waterproof and protective damp-proof and vapour-proof membrane

Additional Information

Applicable Standards/ Compliance: Packaging: Colours:
ASTM D1227 Type III Class 1 requirements for emulsified bituminous coating for roofing ASTM C309-93 concrete curing requirements 20 litres pail &     200 litres drum Dark brown (liquid) Black (dry)

Typical Applications

  • Effectively used in wet area waterproofing
  • Good damp proofing for concrete, masonry, brick, asbestos cement sheets, and roofing felts etc
  • Suitable for the treatment concrete, asphalt, metal, roofing felt and other similar roofing surfaces whether flat, sloping or vertical
  • Floors: to provide a sandwich membrane in new construction or a surface treatment
  • Walls: for interior and exterior walls
  • Roofs: for the maintenance of many types of roofs including built-up felt, asphalt, lead, zinc, aluminium, concrete, lightweight screeds, timber, slate, asbestos cement, corrugated iron
  • As an adhesive: for bonding wood blocks and wood mosaics, insulation board, expanded polystyrene and cork tiles and to provide a key for plastering
  • When added protection is required, AquaShield Pro RBE 5010 may be used in conjunction with a reinforcing fabric
  • As a protective coating on concrete foundations Tanking and waterproofing of substructures to provide an impervious membrane
  • To provide a vapour proof barrier coating for interior & exterior floors and walls including cladded walls
  • High rubber content 5%

Benefits

  • Single component, solvent free
  • Cold applied, no heating required
  • Excellent adhesion
  • Forms elastomeric membrane
  • Reduced chloride penetrations due to hard impermeable surface
  • Multipurpose, serves both as a protective coating and curing membrane
  • High rubber content 10%
  • Resists the attack of salts like chlorides and sulphates that are present in soil
  • Simple and easy to apply, no skilled labour required
  • Ready to use by brush or roller
  • Non- slumping
  • Environmentally friendly. Contains no solvents,no health hazards
  • Asbestos free
  • Easy application due to paintable consistency
Technical Data Sheet Download
Material Safety DataSheet Download
Test Reports Download
Substrate Preparation

The surface shall be cleaned thoroughly of all contaminants like dust, rust, traces of curing compound, oil & grease. All surface imperfections and protrusions are to be removed & repaired. Structurally unsound and friable concrete must be removed and repaired with a suitable concrete repair mortar.

It may be applied to damp but not waterlogged surfaces. Old concrete and steel must be structurally sound prior to application. Light mechanical grinding/grit blasting/high pressure water jet may be used to clean the surface of all the contaminants depending on the degree of contamination on the surface to be coated

Product Preparation

The drum should be rolled on the ground back and forth before decanting material. Stir the contents of the drum thoroughly prior to application

Product Application

Apply by brush, roller or squeegee. Two or more coats must be applied to ensure a durable finish. Second and subsequent coats should be applied at right angles to each other once previous coat  have fully cured, allow min 24 hours between first and second coat for better curing.

AquaShieldPro RBE 6010 can be applied to damp but not water clogged surfaces, dampen the brush before and occasionally during use, for         smoother application.

Below Ground Protection: The product may be applied to green concrete immediately after shuttering has been removed. Blind the first coat  with clean sharp sand to afford higher dry film thickness and aid monitoring layer applications. Sandwich Membrane: Two coats to be applied at right angles, blind second coat with clean sharp sand to provide a mechanical key for top screed (minimum thickness 50mm). AquaShieldPro RBE 6010 membrane should marry up with D.P.C. (where applicable).

Walls with Dampness: Remove any coatings and plaster back to the blockwork. Apply three coats of the product blinding the final layer with clean sharp sand whilst still tacky. Replaster using a render modified with BondPro SBR.

Others
Write Your Own Review
You're reviewing:AquaShieldPro RBE 6010
Your Rating