Where To BuyAll substrates must be sound, clean, dry, smooth and free from protrusions, voids, honeycombs and high spots. Presence of curing agent, paint and oil will impair adhesion. All surface imperfections and protrusions are to be removed and repaired. Structurally unsound and friable concrete must be removed and repaired with a suitable repair mortar. If required light mechanical grinding or wire brushing is recommended.
AquaShieldPro FBE50
Share
Liquid applied, single component, high build, fibrated bitumen emulsion, elastomeric waterproof
membrane
In stock
Only %1 left
SKU
ASPFBE50
| DATA | RESULT |
| Colour | Black |
| Density (ASTM D 1475) | 1.00 ± 0.05 (g/cm3) |
| Solid Content by weight(ASTM D2369-10) | 50 ± 2% |
| Wet film thickness | 400 microns |
| Specific gravity @25ºC | 0.98 ± 0.02 |
| Cure time@ 25ºC | 24 hours per coat |
| Recoat time @25ºC | 4 – 24 hours |
| Touch dry time @25ºC | 2 - 4 hours per coat |
| Application Temperature | From +5º C to +45º C |
| Service Temperature | From -10º C to +85º C |
| Flashpoint | Non-flammable |
| VOC content | >30 g/ liter |
* All values given are subject to 5-10% tolerance
* Properties listed above are only based on controlled laboratory samples and tests. Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
®=Registered trademark of the North Group.
Description
AquaShieldPro FBE50 is a single component, high build fibrated bitumen emulsion based protective coating containing mineral fillers, stabilizing additives, and non-asbestos fibres which dries to provide to form a continuous seamless waterproof membrane which can fill and seal hairline cracks, pinholes and minor surface imperfections. The coating is dark brown in color, which dries to form a tough black flexible film
Additional Information
| Applicable Standards/ Compliance: | Packaging: | Colours: | Coverage/ Yield: |
| Complies with ASTM D 1227 Type II, Class 1 BS 8102:1990 | 20 litres pail & 200 litres drum | Black | Application of 2 coats @ 1m²/litre/ coat will give a total Dry Film Thickness of 1mm |
Typical Applications
- Particularly suitable for a wide range of applications including wet areas, foundations, basements, terraces, retaining walls, bridge abutments, planters, inverted roofs and remedial repairs to felt, asphalt, concrete, fibrous cement or other roof structures when protected from direct sunlight.
- To protect concrete against acidic and salty ground waters.
- Waterproofing membrane in sandwich construction.
- General purpose waterproofing and repair compound for pitched or flat roofs
Benefits
- Single component
- Cold applied, no heating required
- No joints, forms elastomeric membrane.
- High-build properties ensure rapid application
- Economical
- Versatile
- Non-flammable
- High elasticity, ensuring a permanently flexible
- barrier over a wide range of temperatures.
- Asbestos free product. Can be applied in closed
- and confined spaces.
- Excellent adhesion can be applied to a range of substrates like concrete, metal, wood, cork, roofing felt, corrugated iron, zinc, lead, asbestos cement, etc.
- Easy application due to paintable consistency,
- suitable for new and old concrete.
Substrate Preparation
Product Preparation
The drum should be rolled on the ground back and forth before decanting material. Stir the contents of the drum thoroughly prior to application
Product Application
Applied by brush, broom, roller, trowel or squeegee to obtain a continuous unbroken film. 2 (Two) coats are required with the second coat applied at right angles after the first coat has dried completely
AquaShieldPro FBE50 must be protected from mechanical damage during subsequent construction or backfilling works. Any damage may be repaired by spot application. If a water flood test to be run, the membrane should be cure for a minimum of 10 days.
In areas where AquaShieldPro FBE50 is to receive renders, screeds, tile adhesive or plaster, a keyed surface should be formed by gritting the second coat with clean dry sharp sand whilst the material is still wet. Any excess sand should be brushed off when the product has dried. Whilst AquaShieldPro FBE50 is resistant to frost, adhesion will be impaired if applied to frosted substrates. Application should be avoided if substrate temperatures are below 50º C or rain is imminent.
Others
Tools, equipment and mixers with clean water immediately after use (before hardening) using soapy water. Cured material can be removed mechanically.
Write Your Own Review